Medium bow back Lincolnshire Windsor spindle back armchair stamped AMOS GRANTHAM, with 9 long spindles, 8 short, crook underarms, straight seat sides, ring and cove front leg turnings, with 1 lower ring, plain back legs, H stretcher with darts WS 190 & WS 189

Medium bow back Lincolnshire Windsor spindle back armchair stamped AMOS GRANTHAM, with 9 long spindles, 8 short, crook underarms, straight seat sides, ring and cove front leg turnings, with 1 lower ring, plain back legs, H stretcher with darts WS 190

This is a typical early Lincolnshire windsor armchair. Plain back legs with the front ones having the design of a thin ring above an exaggerated shallow cove, an all-spindle back support and curved underarm supports. This one has an ash seat with yew for the other components. I believe that this is the very essence of a chair that was made in the first period of Windsor chairmaking in the county, namely 1800-1812. 

The name stamp on the edge of the seat is AMOS GRANTHAM, so we know exactly in whose workshop it was made. It came from a house just outside Newark and it had been in the family for many years. It was in a slightly distressed state when I brought it at auction but I got a restorer to make it usable again.

John Amos was a wheelwright and as such ran a business for the first 15 years of his working life making wagons and carts for farmers and merchants as well as servicing ones that were already in use. It was not until 1809 that the first advert by him was posted in the paper searching for journeymen chairmakers. All of the chairs that I have seen from his workshop are of the second period type, which I believe started to be produced in about 1812 but I was not surprised to seen this design by him. This leads me to think that this chair was probably made in the first 3 years of his manufacture, namely 1809-1812.

Bench holdfast marks on medium bow back Lincolnshire Windsor spindle back armchair WS 190 stamped AMOS GRANTHAM WS 189

This picture shows part of the underside of the armbow of this AMOS chair. You can see quite clearly the small areas of cross-hatching that are impressed into the surface of the wood. This was caused by bench holdfasts. These have been used by woodworkers since ancient times and are used, as their name suggests, to hold a piece of wood firmly to the workbench. They are the shape of a swan's neck, with the neck part slipped down a hole in the bench and the crooked head part tapped with a mallet to spread the bend and hold the wood secure. They can easily be released with a sideways tap. 

For the holdfast to grip the wood better, there is cross-hatching filed into the end. This is what has left the marks above. The length of yew wood would be soften in the steam box and the placed against the profile form that it is to be moulded around and once bent, it is held firmly in place while it cools by a series of holdfasts. 

© William Sergeant 2017 and 2020